If you have ever had to deal with putty on your carpet, you know it can be one of the most frustrating situations imaginable. Putty that has dried and hardened in your carpet can be nearly impossible to remove completely and will leave behind an unsightly residue, or even damage your carpet as you try to scrape it out. Fortunately, though, there are ways to effectively clean up putty from the carpet so that you don’t have to live with the unsightly mess any longer. Here are five tips on how to get putty out of the carpet that will make cleaning up your carpet easier than ever before.
5 Ways to Get Putty Out of Carpet
Cover the area with ice cubes
When you’re dealing with something sticky, ice cubes are your best friends. A cold substance will solidify whatever you have on your hands and allow it to be removed much more easily. Add a few ice cubes on top of putty and wait for them to melt. The putty should come off with no problem. If not, just repeat. Remember: slow is fast when it comes to removing tough substances from surfaces. Try soaking up as much of whatever you’re trying to get rid of as possible before attacking another area. This method can also be used on larger substances like paint or grease stains; just remember that paint has a completely different melting point than putty.
Use baking soda paste
Baking soda is a mild abrasive that can help remove the putty from the carpet. Make a paste by mixing equal parts baking soda and water, and apply it to your putty with a toothbrush. Allow it to sit for 10 minutes, then scrub off excess with an old toothbrush or your fingers. Rinse well with warm water when finished. You may want to do a patch test in an inconspicuous area first to make sure that no damage occurs.
Read Also: Easy Tips How to Remove Lipstick from Carpet
To avoid having gooey green stuff all over you, use duct tape, While duct tape isn’t necessarily designed for removing gunk from carpeting, any good carpenter will tell you that many tools have more than one use. The key here is using it judiciously and not spending too much time on a stained spot – if you start seeing indentations from where you’re scraping, you’ll be better off moving on. If you’ve got some in your toolbox (or if an open roll was conveniently sitting nearby), give it a shot! If things get ugly before clean-up begins – don’t worry about taking full advantage of what’s left behind.
Use dish soap
If you’ve accidentally spread putty across your carpet, no worries you can still remove it. Simply dissolve it using dish soap. Scrape off as much as you can, then dampen a washcloth with warm water and dish soap (only use a non-bleach formula). Rub gently until most of the putty is dissolved; be careful not to damage or scratch your carpeting. Once removed, you might want to consider vacuuming up leftover residue; take care not to push more into your carpeting by accident.
Use rubbing alcohol
Rubbing alcohol has a low surface tension that allows it to mix with chemicals easily. So, if you spill epoxy or silicone on your carpet and want to clean it up quickly, rubbing alcohol can dissolve it. Remember that you should use alcohol in a well-ventilated area and follow instructions carefully. You don’t want to end up making your problem worse. You should also be aware that different types of putty need different cleaning methods for instance. If it’s oil-based putty you’re dealing with, try soaking paper towels in rubbing alcohol and laying them over the stain for 10 minutes before blotting off excess solution.
Read Also: How To Get Hair Dye Out Of Carpet
Use paint thinner or acetone but only if you have experience with it
Paint thinner and acetone are two cleaning products that have a good deal of chemicals in them. If you’re not sure what you’re doing, then do not use either product. Instead, use mineral spirits because it will be less harmful if something goes wrong while removing putty from the carpet. Mineral spirits can remove paint stains out of carpets too. Once your carpet is dry, see if there is any residue leftover from using putty remover or mineral spirits. If there is, then repeat steps 2-4 again until all traces are gone.