Hair dye can be extremely difficult to remove from carpeting, so you’ll want to act quickly once you notice the problem has occurred. Following these steps will help you How To Get Hair Dye Out Of Carpet get rid of the stain and restore your carpeting to its original condition. Be sure to test the cleaning solution on an area of the carpet that’s not easily seen first, though, so you can avoid damaging your carpet further or having an allergic reaction due to improper cleaning methods.
How To Get Hair Dye Out Of Carpet – Easy Method
Prepare for Action
There’s a reason why mishaps like dyeing your hair cause more stress than most other accidents. When you mess up, you don’t just have to fix it you have to convince others that it was an accident. Don’t panic there are still ways of covering things up. The key is preparation and knowing what action you need to take at each step. Here are some helpful steps to take if hair dye ends up on your carpet.
Read Also: Where Do Carpet Beetles Come From
Fill A Bucket With Soapy Water
For easy cleanup, put on a pair of rubber gloves and fill a bucket with water and your favorite cleaning solution. Dip a clean rag into the water, then scrub away at any stain until it’s gone. Once you’ve cleaned one spot, dip another rag in your soapy water and go after any remaining stains or spots on your carpet. If you have time before they set, start working while standing over a bucket of water with some rags soaking in it. It makes scrubbing much easier than trying to hold a dirty rag while kneeling next to a soapy puddle. When you’re done cleaning up after yourself, simply toss each rag back into your bucket of soapy water.
Place The Bucket Under Spill
If a shampoo bottle or other object starts leaking, immediately place a bucket directly under it. The faster you can react and remove spilled hair dye, the better. You might be able to blot up most of it with paper towels, but if there’s quite a bit of dye on your carpet. Using a bucket will ensure you don’t leave any stains behind. Use A Wet Vacuum To Remove the Remaining Residue. If you don’t have any buckets handy and want to avoid damaging your carpet by bottling. Try sucking up as much of it as possible with a wet vacuum (make sure it has settings for liquids). It won’t get rid of all of it, especially in deep pile carpets but it can make clean-up easier.
Use a Water Extractor
The first step in removing dye from the carpet is removing as much of it as possible with water. If your carpet has been dyed more than once, using a powerful extraction machine might be a good idea. These high-pressure extractors can suck up more dye in one go than you can with a garden hose, and they’re easier on your carpets, too. However, make sure you test an inconspicuous area first; these things don’t always work perfectly.
Open Windows (If Applicable)
Locate your vacuum cleaner and point it at the affected area of the carpet, turn it on and set it to maximum suction. Positioning a fan next to your vacuum can also help remove excess dye fumes. Be sure that both you and anyone else in your household are wearing proper safety equipment. These fumes may cause dizziness or vomiting, so wear a respirator mask as well as rubber gloves. Make sure your kids aren’t underfoot and that they don’t get near any open windows or doors while you’re working.
Soak Up Any Remaining Color
To avoid permanent staining, try blotting up any remaining color with a towel. Don’t rub or scrub, though; that could further damage your carpet and make clean-up even more difficult. Soaking up as much hair dye as possible should help you avoid staining in future treatments. Be sure to check out our original post on removing hair dye for more tips and tricks.
Neutralize with Vinegar
First, you’ll want to blot up as much of that hair dye as possible. The longer it sits on your carpeting, the harder it will be to get out completely. If any color has leached into your carpeting, mix one-part vinegar with one part water in a spray bottle and saturate spots of discoloration until you see them disappear. The acidity of vinegar neutralizes dye molecules, removing even color that may have bled into deeper fibers. Once you’ve soaked up as much dye as possible and applied your vinegar solution, blot again with a clean towel or paper towels. Repeat if necessary until no color transfers to a white towel after rubbing vigorously let dry completely before putting anything back onto your carpeting.
Let the Carpet Dry
The first thing you should do is allow your carpet to dry completely before doing anything else. The older and more set-in your stain is, the longer it will take. Try to set a timer so that you don’t forget about it, but if you do miss a step here or there, don’t worry! You can always come back later.
Read Also: How To Clean Diarrhea Out Of Carpet